Creative Labs Video Blaster SE (CT6040) Драйвера
Creative Labs Video Blaster SE (CT6040) Драйвера
Приветствую. Ищу драйвера и софт на сабж.
На форуме ссылки битые, иностранцы говорят что нечем прочитать дискеты.
Гуглил долго, пока безрезультатно. Может у кого то в коллекции есть такая доска, заделитесь пожалуйста, хочу свою проверить живая или нет.
Заранее благодарю.
На форуме ссылки битые, иностранцы говорят что нечем прочитать дискеты.
Гуглил долго, пока безрезультатно. Может у кого то в коллекции есть такая доска, заделитесь пожалуйста, хочу свою проверить живая или нет.
Заранее благодарю.
Мысль зарождается где-то в самом низу спинного мозга, идёт вверх по позвоночному столбу и вспыхивает на кончике нерва внутри черепной коробки, озаряя пустые своды ...
Creative Labs Video Blaster SE (CT6040) Драйвера
Amarr, у меня CT6000. Подошли дрова из вложения.
- Вложения
-
- V_BLASTER_1.1.zip
- (674.17 КБ) 108 скачиваний
Creative Labs Video Blaster SE (CT6040) Драйвера
Спасибо, сейчас попробую .
Мысль зарождается где-то в самом низу спинного мозга, идёт вверх по позвоночному столбу и вспыхивает на кончике нерва внутри черепной коробки, озаряя пустые своды ...
- led178
- Advanced Member
- Сообщения: 2259
- Зарегистрирован: 26.09.2018,10:59
- Откуда: Гатчина
-
Вклад в сообщество
Creative Labs Video Blaster SE (CT6040) Драйвера
Amarr, Escalibur, а что эта штука умеет? (ct6040)
Как видеокарта работает? Зачем два разъёма?
Как видеокарта работает? Зачем два разъёма?
Creative Labs Video Blaster SE (CT6040) Драйвера
led178, видеозахват. Оверлей на экран может выводить с видеовхода.
- led178
- Advanced Member
- Сообщения: 2259
- Зарегистрирован: 26.09.2018,10:59
- Откуда: Гатчина
-
Вклад в сообщество
Creative Labs Video Blaster SE (CT6040) Драйвера
Escalibur, иначе говоря бесполезная штука?
Ну разве что фанатам креатива?
Ну разве что фанатам креатива?
Creative Labs Video Blaster SE (CT6040) Драйвера
led178, да, можно и так сказать.
- led178
- Advanced Member
- Сообщения: 2259
- Зарегистрирован: 26.09.2018,10:59
- Откуда: Гатчина
-
Вклад в сообщество
Creative Labs Video Blaster SE (CT6040) Драйвера
https://web.archive.org/web/20000603093 ... t6040.html
Video Blaster SE
CT6040
Video Blaster SE (Special Edition) is a video adapter for IBM 386 PCs and higher compatibles which converts a standard full-motion video image (composite video source) into a format for display on a computer graphics monitor. It can position and scale the video image onto the output display and allows the video image to be merged with computer graphics for interactive multimedia applicaiton. VB SE supports both NTSC and PAL system. VB SE has to work with standard VGA card that incorporates a feature connector. It accepts composite video and S-Video; caters 3 composite video inputs (video 0, 1, 2) or 1 composite video inputs and 1 S-Video source using special S-Video adapter cable.
System Requirements
IBM PC 386 DX33 and above
4MB system memory
2MB hard drive space, minimum
16-bit ISA expansion slot
MS DOS 3.1 or PC DOS version 5.0 and above
VGA card with standard VESA compliant feature connector
Windows 3.1 or higher installed
MS Video For Windows 1.0 and above
General
Interlace and Non-Interlace Supported
AD/DA Resolution: 8-bits resolution; sampling rate at 32 MHz
Hardware Specifications
Supply Voltage Requirement (Loading): +5, +12, -12 Volt
Current Consumption (Typical.): 1, 0.28, 0.104 A respectively
Clocks Frequency: 50 MHz and 26.8 MHz
Video Signal Input Level:
Composite video signal: 1.0 Vpp @ 75-Ohm load
S-Video signal: 1.0 Vpp (nominal)
Video Signal Output Level: RGB 0.6 Vp-p (typical)
Hardware Settings
Default settings shown in [brackets]
Interrupt (IRQ): 5, [10], 11, 12, 15
I/O Address (s/w programmable): 690, 6E0, 710, [718], 780 Hex
Connectors
VGA/Video In Connector - 15 pin D-shell female connector
Monitor Out Connector - 15 pin D-shell female connector
VGA Feature Connector - 26 way double row straight header
Video Blaster SE
CT6040
Video Blaster SE (Special Edition) is a video adapter for IBM 386 PCs and higher compatibles which converts a standard full-motion video image (composite video source) into a format for display on a computer graphics monitor. It can position and scale the video image onto the output display and allows the video image to be merged with computer graphics for interactive multimedia applicaiton. VB SE supports both NTSC and PAL system. VB SE has to work with standard VGA card that incorporates a feature connector. It accepts composite video and S-Video; caters 3 composite video inputs (video 0, 1, 2) or 1 composite video inputs and 1 S-Video source using special S-Video adapter cable.
System Requirements
IBM PC 386 DX33 and above
4MB system memory
2MB hard drive space, minimum
16-bit ISA expansion slot
MS DOS 3.1 or PC DOS version 5.0 and above
VGA card with standard VESA compliant feature connector
Windows 3.1 or higher installed
MS Video For Windows 1.0 and above
General
Interlace and Non-Interlace Supported
AD/DA Resolution: 8-bits resolution; sampling rate at 32 MHz
Hardware Specifications
Supply Voltage Requirement (Loading): +5, +12, -12 Volt
Current Consumption (Typical.): 1, 0.28, 0.104 A respectively
Clocks Frequency: 50 MHz and 26.8 MHz
Video Signal Input Level:
Composite video signal: 1.0 Vpp @ 75-Ohm load
S-Video signal: 1.0 Vpp (nominal)
Video Signal Output Level: RGB 0.6 Vp-p (typical)
Hardware Settings
Default settings shown in [brackets]
Interrupt (IRQ): 5, [10], 11, 12, 15
I/O Address (s/w programmable): 690, 6E0, 710, [718], 780 Hex
Connectors
VGA/Video In Connector - 15 pin D-shell female connector
Monitor Out Connector - 15 pin D-shell female connector
VGA Feature Connector - 26 way double row straight header
- led178
- Advanced Member
- Сообщения: 2259
- Зарегистрирован: 26.09.2018,10:59
- Откуда: Гатчина
-
Вклад в сообщество
Creative Labs Video Blaster SE (CT6040) Драйвера
groups.google.com/g/fido7.su.hardw.other/c/GJSTikywpm4/m/OIHMiN0LcE8J
"Люди с видеобластеpами (у меня модель Creative CT 6040), можно ли используя его
писать mov,dat,avi (т.е. захватывать не отдельные кадpы как написано в паспоpте, а
движущиеся изобpажение со звуком), есть ли специальные пpоги для этого под МД95
и как они называются?"
"Люди с видеобластеpами (у меня модель Creative CT 6040), можно ли используя его
писать mov,dat,avi (т.е. захватывать не отдельные кадpы как написано в паспоpте, а
движущиеся изобpажение со звуком), есть ли специальные пpоги для этого под МД95
и как они называются?"