Ну, не особо интересно...
Код: Выделить всё
%BACKUP-I-IDENT, Stand-alone BACKUP V6.2; the date is 24-MAR-2021 18:10:00.16
$
$
?02 EXT HLT
PC = 81B4A15B
>>>
>>>BOO DUA1
(BOOT/R5:0 DUA1)
2..
-DUA1
1..0..
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map PAGEFILE.SYS on the System Disk
OpenVMS (TM) VAX Version V6.2 Major version id = 1 Minor version id = 0
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM)
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 24-MAR-2021 18:10
Configuring devices . . .
Now configuring HSC, RF, and MSCP-served devices . . .
Please check the names of the devices which have been configured,
to make sure that ALL remote devices which you intend to use have
been configured.
If any device does not show up, please take action now to make it
available.
Available device DUA0: device type RA90
Available device DUA1: device type RA90
Enter "YES" when all needed devices are available: YES
%BACKUP-I-IDENT, Stand-alone BACKUP V6.2; the date is 24-MAR-2021 18:12:34.04
$ BACKUP/IMAGE DUA1:VMS062.B/SAVE_SET DU0:
%BACKUP-I-PROCDONE, operation completed. Processing finished at 24-MAR-2021 18:
14:25.21
If you do not want to perform another standalone BACKUP operation,
use the console to halt the system.
If you do want to perform another standalone BACKUP operation,
ensure the standalone application volume is online and ready.
Enter "YES" to continue: YES
%BACKUP-I-IDENT, Stand-alone BACKUP V6.2; the date is 24-MAR-2021 18:14:33.43
$
?02 EXT HLT
PC = 81B4A14D
>>>BOO DUA0
(BOOT/R5:0 DUA0)
2..
-DUA0
1..0..
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
OpenVMS (TM) VAX Version BI62-I06 Major version id = 1 Minor version id = 0
OpenVMS VAX V6.2 Installation Procedure
Model: MicroVAX 3900 Series
System device: RA90 - _DUA0:
Free Blocks: 3866052
CPU type: 10-01
* Please enter the date and time (DD-MMM-YYYY HH:MM) 240MA\AM0\-MAR-2021 18:15
On MIN or UPGRADE system startup - CLUE is not run.
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:06.05 %%%%%%%%%%%
Operator _OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:06.07 %%%%%%%%%%%
Operator status for operator _OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:06.36 %%%%%%%%%%%
Logfile has been initialized by operator _OPA0:
Logfile is SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:06.37 %%%%%%%%%%%
Operator status for operator SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%SYSTEM-I-BOOTUPGRADE, security auditing disabled
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:07.35 %%%%%%%%%%%
Message from user JOB_CONTROL
%JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:07.36 %%%%%%%%%%%
Message from user JOB_CONTROL
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%SYSTEM-I-BOOTUPGRADE, security server not started
%%%%%%%%%%% OPCOM 24-MAR-2021 18:15:11.16 %%%%%%%%%%%
Message from user SYSTEM
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...
If this system disk is to be used in a cluster with multiple system
disks, then each system disk must have a unique volume label. Any
nodes having system disks with duplicate volume labels will fail to
boot into the cluster.
You can indicate a volume label of 1 to 12 characters in length. If you
want to use the default name of OpenVMS062, press RETURN in response
to the next question.
* Enter the volume label for this system disk [OpenVMS062]: TEST
* Enter name of drive holding the OpenVMS distribution media: DUA1:
* Is the OpenVMS media ready to be mounted? [N] Y
%MOUNT-I-MOUNTED, VAXVMS062 mounted on _DUA1:
Select optional software you want to install. You can install one
or more of the following OpenVMS or DECwindows components:
o OpenVMS library - 43500 blocks
o OpenVMS optional - 19100 blocks
o OpenVMS Help Message - 8400 blocks
o Text versions of three OpenVMS manuals - 4650 blocks
o DECwindows workstation support - 25750 blocks
o DECwindows base support - 3600 blocks
o OpenVMS Management Station - 5900 blocks
Space remaining on system disk: 3865872 blocks
* Do you want to install the OpenVMS library files? (Y/N) Y
Space remaining on system disk: 3822372 blocks
* Do you want to install the OpenVMS optional files? (Y/N) Y
Space remaining on system disk: 3803272 blocks
The OpenVMS Management Station is a client-server application
that provides OpenVMS system management capabilities through a
client application on a personal computer (PC) running Microsoft
Windows. The server application runs on OpenVMS systems and is
automatically installed as part of the OpenVMS operating system.
This option provides the files used to create the installation media
for the PC client software. If you want to use the OpenVMS Management
Station, you must install these files on at least one OpenVMS system to
create the installation media, which can then be used to install the
PC client on one or more PCs.
Note: To use the OpenVMS Management Station on your PC, you must be
running Digital's PATHWORKS V5.0A for DOS and Windows (or V5.1)
software.
The OpenVMS Management Station optional files consume approximately 5900
blocks and will be placed on your system disk in SYS$COMMON:[TNT.CLIENT].
* Do you want to install the optional OpenVMS Management Station files? (Y/N) Y
Space remaining on system disk: 3797372 blocks
The Help Message utility (MSGHLP) provides online explanations
and user actions for OpenVMS messages in place of the hardcopy
OpenVMS System Messages and Recovery Procedures Reference Manual,
which is now separately orderable.
The MSGHLP database file, MSGHLP$LIBRARY.MSGHLP$DATA,
consumes approximately 8400 blocks and will be
placed by default on your system disk in SYS$COMMON:[SYSHLP]
unless you specify an alternate device when prompted.
* Do you want to install the MSGHLP database? (Y/N) Y
You can install this database on your system disk in SYS$COMMON:[SYSHLP]
or on an alternate device. If you specify an alternate device, but no
directory, MSGHLP$LIBRARY.MSGHLP$DATA is placed in [HELP_MESSAGE]. When
prompted, take the default of the system disk or specify an alternate
device using this format:
device:[directory]
* Where do you want to install the MSGHLP database?[SYS$COMMON:[SYSHLP]]
Space remaining on system disk: 3788972 blocks
You have the choice of installing text versions of one or more OpenVMS
manuals.
o OpenVMS Master Index - 3700 blocks
o OpenVMS Glossary - 650 blocks
o Overview of OpenVMS Documentation - 300 blocks
You can install these manuals, by default, to your system disk
in [SYSHLP.VMSDOC], or to an alternate device of your choice.
In either case, all manuals must reside on the same device.
If you choose an alternate device and do not specify a directory,
[VMSDOC_TEXT] will be created for you. The directory structure
for an alternate device should resemble the following:
device:[directory]
* Do you want any of these three OpenVMS manuals? (Y/N) Y
* Do you want all three OpenVMS manuals? (Y/N) Y
* Where do you want to install the OpenVMS manual(s)? [SYSHLP.VMSDOC]
The selected OpenVMS manual(s) will reside at [SYSHLP.VMSDOC]
Space remaining on system disk: 3784322 blocks
You can select DECwindows support now, or you can use the
DECW$TAILOR utility to provide or remove DECwindows support
after the installation.
Some media, TK50s in particular, can be very slow when
tailoring on files. You might want to provide DECwindows
options now and tailor off unwanted files later.
You can install all of the DECwindows components provided in
this kit, which requires approximately 29350 blocks, or you
can select specific components.
o DECwindows workstation support - 20750 blocks
- 75 dots per inch video fonts (included)
- 100 dots per inch video fonts (optional) - 5000 blocks
o DECwindows base support - 3600 blocks
If you are installing this kit on a workstation or on a VAXcluster
that contains workstations, then you must choose the DECwindows
workstation support option.
If you are installing this kit on a system that does not include
workstations but does include Xterminals, then you might want to
choose the DECwindows workstation support option to provide font
files. If you decide not to select the DECwindows workstation
support option at this time, then you will have to use the
DECW$TAILOR utility to provide font files for the Xterminals.
If you plan to run DECwindows software, then you must choose the
DECwindows base support option.
NOTE: This kit does NOT contain full DECwindows support. It includes
only the DECwindows base and workstation support components.
To obtain full DECwindows support, you must also install the
separate DECwindows Motif for OpenVMS VAX layered product.
NOTE: VMS DECwindows Motif Version 1.1 is the minimum version that can
be used with OpenVMS VAX Version 6.2.
* Do you want to provide optional DECwindows support? (Y/N) Y
* Do you want to install DECwindows workstation support? (Y/N) Y
Space remaining: 3759972 blocks
You elected to install DECwindows workstation support, you
automatically get the following installed:
- DECwindows workstation support
- DECwindows base support
- 75 dots per inch video fonts
All DECwindows applications run with 75 dots per inch video fonts.
By default, most systems startup with 75 dots per inch video fonts.
You have the option of installing 100 dots per inch video fonts,
which certain applications can take advantage of.
For the VAXstation 4000 series machines, 100 dots per inch video fonts
are used by default. If you decide not to install 100 dots per inch
video fonts, you must edit SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.COM
to force 75 dots per inch video fonts to be the default. Otherwise,
certain applications may not space text properly.
For instructions on how to configure your system with both 75 and 100
dots per inch video fonts, see the installation guide or look at the
template command procedure SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.TEMPLATE.
* Do you want 100 dots per inch video fonts installed? (Y/N) Y
Space remaining: 3754972 blocks
The following options will be provided:
OpenVMS library
OpenVMS optional
OpenVMS Help Message
OpenVMS Master Index
OpenVMS Glossary
Overview of OpenVMS Documentation
OpenVMS Management Station Software -- PC files
DECwindows workstation support with:
- DECwindows base support
- 75 dots per inch video fonts
- 100 dots per inch video fonts
Space remaining on system disk: 3754972 blocks
* Is this correct? (Y/N) Y
Restoring OpenVMS library save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS optional save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS Help Message save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS manuals save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS Management Station Software -- PC files
%BACKUP-I-STARTVERIFY, starting verification pass
You can now remove the OpenVMS distribution kit from DUA1:.
Load the DECwindows distribution kit.
* Enter name of drive holding the DECwindows distribution media: DUA1l\l\:
* Is the DECwindows media ready to be mounted? [N] Y
%MOUNT-I-MOUNTED, VAXVMS062 mounted on _DUA1:
Restoring DECwindows base support save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows workstation support save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows 75 dots per inch video fonts save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows 100 dots per inch video fonts save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
You can now remove the DECwindows distribution kit from DUA1:.
Creating [VMS$COMMON] directory tree ...
In a cluster, you can run multiple systems sharing all files except
PAGEFILE.SYS, SWAPFILE.SYS, SYSDUMP.DMP, and VAXVMSSYS.PAR.
* Will this node be a cluster member? (Y/N) N
* Do you want DECwindows Motif as the default windowing system? (Y/N) Y
Now we will ask you for new passwords for the following accounts:
SYSTEM, SYSTEST, FIELD
Passwords must be a minimum of 8 characters in length. All passwords
will be checked and verified. Any passwords that can be guessed easily
will not be accepted.
* Enter password for SYSTEM:
* Re-enter for verification:
%UAF-I-MDFYMSG, user record(s) updated
%VMS-I-PWD_OKAY, account password for SYSTEM verified
* Enter password for SYSTEST:
* Re-enter for verification:
%UAF-I-MDFYMSG, user record(s) updated
%VMS-I-PWD_OKAY, account password for SYSTEST verified
The SYSTEST_CLIG account will be disabled. You must re-enable
it before running UETP but do not assign a password.
%UAF-I-PWDLESSMIN, new password is shorter than minimum password length
%UAF-I-MDFYMSG, user record(s) updated
* Enter password for FIELD:
* Re-enter for verification:
%UAF-I-MDFYMSG, user record(s) updated
%VMS-I-PWD_OKAY, account password for FIELD verified
Creating RIGHTS database file, SYS$SYSTEM:RIGHTSLIST.DAT
Ignore any "-SYSTEM-F-DUPIDENT, duplicate identifier" errors.
%UAF-I-RDBCREMSG, rights database created
%UAF-I-RDBADDMSGU, identifier DEFAULT value [000200,000200] added to rights data
base
%UAF-I-RDBADDMSGU, identifier FIELD value [000001,000010] added to rights databa
se
%UAF-I-RDBADDMSGU, identifier SYSTEM value [000001,000004] added to rights datab
ase
%UAF-I-RDBADDMSGU, identifier SYSTEST value [000001,000007] added to rights data
base
%UAF-E-RDBADDERRU, unable to add SYSTEST_CLIG value [000001,000007] to rights da
tabase
-SYSTEM-F-DUPIDENT, duplicate identifier
%UAF-I-NOMODS, no modifications made to system authorization file
%UAF-I-RDBDONEMSG, rights database modified
Creating MODPARAMS.DAT database file, SYS$SYSTEM:MODPARAMS.DAT
* Please enter the SCSNODE name: TEST
* Please enter the SCSSYSTEMID: 1025
After the installation finishes, you might want to do one or more of the
following tasks:
o DECOMPRESS THE SYSTEM LIBRARIES - To save space, many of the system
libraries are shipped in a data-compressed format. If you have
enough disk space, you can decompress the libraries for faster access.
To data expand the libraries, type:
$ @SYS$UPDATE:LIBDECOMP.COM
If you do not decompress these libraries, you will experience slower
response to the HELP and LINK commands.
o BUILD A STANDALONE BACKUP KIT - You can build a standalone backup kit
using the procedure described in the upgrade and installation supplement"
supplied for your VAX computer.
o TAILOR THE SYSTEM DISK - You might want to review the files provided or
not provided during this installation. If you find there are files
you want to remove from the system disk (TAILOR OFF) or files you want
to add (TAILOR ON), use the following utilities to perform the
desired tailoring.
OpenVMS tailoring: $ RUN SYS$UPDATE:VMSTAILOR
DECwindows tailoring: $ RUN SYS$UPDATE:DECW$TAILOR
NOTE: The tailor procedure cannot be used to TAILOR ON or TAILOR OFF
files located on an alternate disk.
=================================================================
Continuing with OpenVMS VAX V6.2 Installation Procedure.
Configuring all devices on the system ...
You can safely ignore the following NCP error messages.
%NCP-W-UNRCMP, Unrecognized component , Object
If you have Product Authorization Keys (PAKs) to register, you can
register them now.
* Do you want to register any Product Authorization Keys? (Y/N): N
********************************************************************************
After the system has rebooted you must register any Product
Authorization Keys (PAKs) that you have received with this kit.
You can register these PAKs by executing the following procedure:
$ @SYS$UPDATE:VMSLICENSE
See the OpenVMS License Management Utility Manual for any additional
information you need.
********************************************************************************
Now registering the OpenVMS operating system in the
POLYCENTER Software Installation product database
The following product will be registered:
DEC VAXVMS VMS V6.2
The following product has been registered:
DEC VAXVMS VMS V6.2
********************************************************************************
Running AUTOGEN to compute the new SYSTEM parameters ...
%AUTOGEN-I-BEGIN, GETDATA phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GETDATA phase has successfully completed.
%AUTOGEN-I-BEGIN, GENPARAMS phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$MANAGER:VMSIMAGES.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GENPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, GENFILES phase is beginning.
%SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS;1 extended
%SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]SWAPFILE.SYS;1 extended
%SYSGEN-I-CREATED, SYS$SPECIFIC:[SYSEXE]SYSDUMP.DMP;1 created
%AUTOGEN-I-REPORT, AUTOGEN has produced some informational messages which
have been stored in the file SYS$SYSTEM:AGEN$PARAMS.REPORT. You may
wish to review the information in that file.
%AUTOGEN-I-END, GENFILES phase has successfully completed.
%AUTOGEN-I-BEGIN, SETPARAMS phase is beginning.
%AUTOGEN-I-END, SETPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, REBOOT phase is beginning.
The system is shutting down to allow the system to boot with the
generated site-specific parameters and installed images.
The system will automatically reboot after the shutdown and the
installation will be complete.
SHUTDOWN -- Perform an Orderly System Shutdown
%SHUTDOWN-I-BOOTCHECK, performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, basic reboot consistency check completed
%SHUTDOWN-I-OPERATOR, this terminal is now an operator's console
%OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running
%SHUTDOWN-I-DISLOGINS, interactive logins will now be disabled
%SET-I-INTSET, login interactive limit = 0, current interactive value = 0
%SHUTDOWN-I-STOPQUEUES, the queues on this node will now be stopped
%JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT;
-RMS-E-FNF, file not found
SHUTDOWN message from user SYSTEM at Batch 18:40:44
The system will shut down in 0 minutes; back up SOON. Please log off.
Reboot system with AUTOGENerated parameters
%SHUTDOWN-I-STOPUSER, all user processes will now be stopped
%SHUTDOWN-I-REMOVE, all installed images will now be removed
%SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted
%OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running
%OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running
?06 HLT INST
PC = 822C07C5
Loading system software.
No default boot device has been specified.
Available devices.
-DUA0 (RA90)
-DUA1 (RA90)
-XQA0 (08-00-2B-0E-EE-87)
Device? [XQA0]: DUA0
(BOOT/R5:0 DUA0)
2..
-DUA0
1..0..
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V6.2 Major version id = 1 Minor version id = 0
*****************************************************************
OpenVMS VAX V6.2
You have SUCCESSFULLY installed the OpenVMS VAX Operating System.
The system is now executing the STARTUP procedure. Please
wait for the completion of STARTUP before logging in to the
system.
*****************************************************************
%STDRV-I-STARTUP, OpenVMS startup begun at 24-MAR-2021 18:41:56.31
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:17.40 %%%%%%%%%%%
Operator _TEST$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:17.43 %%%%%%%%%%%
Operator status for operator _TEST$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:17.50 %%%%%%%%%%%
Logfile has been initialized by operator _TEST$OPA0:
Logfile is TEST::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:17.51 %%%%%%%%%%%
Operator status for operator TEST::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%SET-I-NEWAUDSRV, identification of new audit server process is 0000010A
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:18.35 %%%%%%%%%%%
Message from user AUDIT$SERVER on TEST
%AUDSRV-I-NEWSERVERDB, new audit server database created
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:18.56 %%%%%%%%%%%
Message from user AUDIT$SERVER on TEST
%AUDSRV-I-REMENABLED, resource monitoring enabled for journal SECURITY
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:18.74 %%%%%%%%%%%
Message from user AUDIT$SERVER on TEST
%AUDSRV-I-NEWOBJECTDB, new object database created
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:19.57 %%%%%%%%%%%
Message from user JOB_CONTROL on TEST
%JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:19.59 %%%%%%%%%%%
Message from user JOB_CONTROL on TEST
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:21.63 %%%%%%%%%%%
Message from user SYSTEM on TEST
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:21.70 %%%%%%%%%%%
Message from user SYSTEM on TEST
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:21.74 %%%%%%%%%%%
Message from user SYSTEM on TEST
%SECSRV-I-SERVERSTARTINGU, security server starting up
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:21.92 %%%%%%%%%%%
Message from user SYSTEM on TEST
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting u
p
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:23.17 %%%%%%%%%%%
Message from user SYSTEM on TEST
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:24.32 %%%%%%%%%%%
Message from user SYSTEM on TEST
Warning: DECdtm log file not found (SYS$JOURNAL:SYSTEM$TEST.LM$JOURNAL)
%RMS-E-FNF, file not found
TP server process waiting
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:25.36 %%%%%%%%%%%
Message from user AUDIT$SERVER on TEST
Security alarm (SECURITY) and security audit (SECURITY) on TEST, system id: 1025
Auditable event: Audit server starting up
Event time: 24-MAR-2021 18:42:25.15
PID: 00000103
Username: SYSTEM
%%%%%%%%%%% OPCOM 24-MAR-2021 18:42:26.16 %%%%%%%%%%%
Message from user AUDIT$SERVER on TEST
Security alarm (SECURITY) and security audit (SECURITY) on TEST, system id: 1025
Auditable event: Identifier added
Event time: 24-MAR-2021 18:42:26.11
PID: 00000103
Process name: STARTUP
Username: SYSTEM
Process owner: [SYSTEM]
Image name: TEST$DUA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE
Identifier name: SYS$NODE_TEST
Identifier value: %X80010000
Attributes: none
%UAF-I-RDBADDMSG, identifier SYS$NODE_TEST value %X80010000 added to rights data
base
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 24-MAR-2021 18:42:27.88
Accounting information:
Buffered I/O count: 1230 Peak working set size: 916
Direct I/O count: 479 Peak page file size: 4324
Page faults: 5059 Mounted volumes: 0
Charged CPU time: 0 00:00:26.26 Elapsed time: 0 00:00:36.73
Welcome to OpenVMS VAX V6.2
Username: SYSTEM
Password:
%LICENSE-I-NOLICENSE, no license is active for this software product
%