KDJ11-B и я

DEC Alpha, ARM, MIPS, PowerPC, SPARC, VAX, PDP-8 и другие устройства
Hunta
Advanced Member
Сообщения: 427
Зарегистрирован: 31.08.2020,21:16
Откуда: Самара

KDJ11-B и я

Сообщение Hunta » 16.05.2021,01:16

Пока некоторые ждут, другие просто делают :) И не ждут :)

Код: Выделить всё

@173000g 
 
 
 
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
  Step 1 2 3 4 5 6 7 8 9
 
 
Message 04      Entering Dialog mode
 
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO ZB1
 
 
Trying ZB1
 
Starting system from ZB1
 
 
RT-11SB (S) V05.07
 
.R MSCPCK
 
.ini dl2:
DL2:/Initialize; Are you sure? Y
 
.cop/ver/sys/excl sy:*.dsk dl2:
 Files copied:
SY:SWAP.SYS    to DL2:SWAP.SYS
SY:RT11SB.SYS  to DL2:RT11SB.SYS
SY:RT11FB.SYS  to DL2:RT11FB.SYS
SY:RK.SYS      to DL2:RK.SYS
.....
SY:TSYA10.COM  to DL2:TSYA10.COM
SY:TDL0NL.COM  to DL2:TDL0NL.COM
SY:TDL0.COM    to DL2:TDL0.COM
SY:TSYDL0.COM  to DL2:TSYDL0.COM
 
.cop/boo dl2:rt11zm dl2:
 
.
147250
@173000g 
 
 
 
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
  Step 1 2 3 4 5 6 7 8 9
 
 
Message 04      Entering Dialog mode
 
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL2
 
 
Trying DL2
 
Starting system from DL2
 
 
RT-11ZM (S) V05.07
 
.TYPE V5USER.TXT
 
                                   RT-11 V5.7
 
    Installation  of  RT-11  Version  5.7 is complete and you are now running
......
    contain much of the information you need to use RT-11 Version 5.7.
 
 
.R MSCPCK
 
.sho all
 
RT-11ZM (S) V05.07
Booted from DL2:RT11ZM
22 bit addressing is on
 
USR     is set NOSWAP
EXIT    is set SWAP
KMON    is set NOIND
RUN     is set NOVBGEXE
MODE    is set NOSJ
TT      is set NOQUIET
ERROR   is set ERROR
SL      is set OFF
EDIT    is set KEX
FORTRAN is set FORTRA
KMON nesting depth is 3
Global .SCCA flag is disabled
 
CLI is set DCL, CCL, UCL, NO UCF
 
PDP 11/83 Processor
4088KB of memory
Floating Point Accelerator Unit
Extended Instruction Set (EIS)
Memory Management Unit
Parity Memory
Cache Memory
PMI Memory
50 Hertz System Clock
 
Memory parity support
Global .SCCA support
FPU support
Extended unit support
 
Device    Status                   CSR     Vector(s)
------    ------                   ---     ---------
  RK      Not installed           177400   220
  DL      Resident                174400   160
  DU      Installed               172150   154
  HX      Installed               177560   000
  ZA      Installed               161014   350
  ZB      Installed               161054   354
  ZC      Installed               161114   360
  ZD      Installed               161154   364
  ZE      Not installed           161214   370
  ZF      Not installed           161254   374
  WQ      Not installed           177134   204
  WS      Not installed           177134   204
  LD      Installed               000000   000
  VM      Installed               177572   000
  MU      Not installed           174500   260
  NL      Installed               000000   000
  SL      Installed               000000   000
  NQ      Not installed           174440   120
 
TT  (Resident)
DL  (Resident)
    DL2 = DK , SY
MQ  (Resident)
HX
ZA
ZB
ZC
DU
VM
ZD
LD
NL
SL
15 free slots
 
Job  Name  Console Level State    Low    High  Impure
---  ----  ------- ----- -----    ---    ----  ------
 0   RESORC   0      0   Run     000000 100564 115176
 
No multi-terminal support
 
------- Extended Memory --------
Address   Module    Words   Type
-------   ------    -----   ----
17760000  IOPAGE     4096.   PRM    HDW    BYP
17760000  MEMTOP
00760000  VM      1966080.   SHR
00220300  ......    90016.
00205700  SL         2688.   PVT
00163000  DU         4832.   PVT
00160000  MCA         768.   PRM
00000000  KERNEL    28672.   PRM    HDW
 
------ Low Memory -------
Address   Module    Words
-------   ------    -----
155332    DL          659.
112630    RMON       8865.
100566    USR        2577.
001000    ..BG..    16315.
 
LD0 is  ZB3:S00.DSK[1950.] #
# Handler not loaded
 
 
 
.
137134
@173000g 
 
 
 
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
  Step 1 2 3 4 5 6 7 8 9
 
 
Message 04      Entering Dialog mode
 
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL0
 
 
Trying DL0
 
Starting system from DL0
 
 
 
 
RSX-11M-PLUS V4.6  BL87   2044.KW  System:"DE10  "
>RED DL:=SY:
>RED DL:=LB:
>RED DL:=SP:
>MOU DL0:"RSX11MPBL87"
>@DL:[1,2]STARTUP
>;                      PLEASE NOTE
>;
>;      If you have not yet read the system release notes, please do so
>;      now before attempting to perform a SYSGEN or to utilize the new
>;      features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 19:11 15-may-2021
>TIME 19:11 15-may-2021
>ACS SY:/BLKS=1024.
>CON ONLINE ALL
>ELI /LOG/LIM
>CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
>INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
>INS $QMGCLI
>INS $QMGCLI/TASK=...PRI
>INS $QMGCLI/TASK=...SUB
>QUE /START:QMG
>INS $QMGPRT/TASK=PRT.../SLV=NO
>QUE LP0:/CR/NM
>START/ACCOUNTING
>CON ESTAT LP0:
>QUE BAP0:/BATCH
>QUE BAP0:/AS:BATCH
>@ <EOF>
>dev dl:
DL0:     Public Mounted Loaded Label=RSX11MPBL87 Type=RL02
         Seek_Optimization=Nearest:10.
 
DL1:     Loaded Type=RL02
         Seek_Optimization=Nearest:10.
 
DL2:     Loaded Type=RL02
         Seek_Optimization=Nearest:10.
 
DL3:     Loaded Type=RL02
         Seek_Optimization=Nearest:10.
 
>mou dl1:/for/nowr
>mou dl3:/for
>bru/ini/ver dl1: dl3:
MCR    -- Task not in system
>ins $bru
>bru/ver/ini dl1: dl3:
BRU - Starting verify pass
 
19:15:54  Login failure INVALID USER             TT4:
19:16:06  Login  user SYSTEM         [1,1] TT4:
BRU - Completed
 
>
 19:19:30  Login  user SYSTEM         [1,1] TT1:
19:19:34  Logout user SYSTEM         [1,1] TT1:
19:19:38  Logout user SYSTEM         [1,1] TT4:
run shutup
>
 
RSX-11M-PLUS Shut down program
 
Enter minutes to wait before shutdown:
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: y
All further logins are disabled
 
15-MAY-2021 19:19 System is now shutting down -- DE10
 
QUE /STO:QMG
>
 STOP/ACCOUNTING SHUTUP
19:19:59  SYSLOG -- 47. Exiting
@LB:[1,2]SHUTUP
>
>VCP DISCONNECT /ALL
>@ <EOF>
>
 ELI /NOLOG
>
 ACS DL0:/BLKS=0.
ACS -- Checkpoint file now inactive
>
 DMO DL0:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM  dismounted from DL0:    *** Final dismount initiated ***
19:20:01  *** DL0:  -- Dismount complete
>
 DMO DL1:/DEV/LOCK=V
19:20:06  *** DL1:  -- Dismount complete
DMO -- TT0:    dismounted from DL1:    *** Final dismount initiated ***
>
 DMO DL3:/DEV/LOCK=V
19:20:11  *** DL3:  -- Dismount complete
DMO -- TT0:    dismounted from DL3:    *** Final dismount initiated ***
>
SHUTUP operation complete
 
126130
@173000G 
 
 
 
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
  Step 1 2 3 4 5 6 7 8 9
 
 
Message 04      Entering Dialog mode
 
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL3
 
 
Trying DL3
 
Starting system from DL3
 
 
 
 
RSX-11M-PLUS V4.6  BL87   2044.KW  System:"DE10  "
>RED DL3:=SY:
>RED DL3:=LB:
>RED DL3:=SP:
>MOU DL3:"RSX11MPBL87"
>@DL3:[1,2]STARTUP
>;                      PLEASE NOTE
>;
>;      If you have not yet read the system release notes, please do so
>;      now before attempting to perform a SYSGEN or to utilize the new
>;      features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: ^Z
>@ <EOF>
>RUN SHUTUP
>
 
RSX-11M-PLUS Shut down program
 
Enter minutes to wait before shutdown:
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: Y
All further logins are disabled
 
30-MAR-1982 00:00 System is now shutting down -- DE10
 
@LB:[1,2]SHUTUP
>VCP DISCONNECT /ALL
>@ <EOF>
>
 DMO DL3:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM  dismounted from DL3:    *** Final dismount initiated ***
00:00:28  *** DL3:  -- Dismount complete
>
SHUTUP operation complete
 
126130

falanger
Advanced Member
Сообщения: 2514
Зарегистрирован: 30.04.2008,17:45
Откуда: г Черняховск Калининградскjй обл

Вклад в сообщество

KDJ11-B и я

Сообщение falanger » 16.05.2021,20:12

Запустил 11/83? Молодец. Теперь есть вторая машинка в России с быстрой памятью.

Hunta
Advanced Member
Сообщения: 427
Зарегистрирован: 31.08.2020,21:16
Откуда: Самара

KDJ11-B и я

Сообщение Hunta » 16.05.2021,21:06

falanger писал(а): 16.05.2021,20:12 Запустил 11/83? Молодец.
Мимо. 11/83 я запустил ещё прошлым летом. И у меня две платы KDJ11-B, так что новость совсем не про то

Ответить