Hardware Power ON
@(#) SPARCengine(tm)Ultra(tm) AXi 3.10.8 SME created 1999/03/17 12:34
Probing for keyboard entry to skip POST
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB Done
Skip POST because of L1 (Sun) or BREAK (PS/2) keyboard command.
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0000
Done
Clearing Memory... including Unix Retained Memory...Done
MEM BASE = 0000.0000.3800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
P 00.0000.70f.f000.26ec
Sz 00.0000.c0oe
ttya initialized
Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:0 POR:1
UltraSPARC-IIi Version 9.1 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.3
Probing Memory Group #0 0 + 0 : 0 Megabytes
Probing Memory Group #1 0 + 0 : 0 Megabytes
Probing Memory Group #2 0 + 0 : 0 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Environmental monitoring: Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done
Probing Floppy: No drives detected
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1 at Device 1 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 2 display
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
screen not found.
Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:0 POR:1
UltraSPARC-IIi Version 9.1 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.3
Probing Memory Group #0 0 + 0 : 0 Megabytes
Probing Memory Group #1 0 + 0 : 0 Megabytes
Probing Memory Group #2 0 + 0 : 0 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Environmental monitoring: Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done
Probing Floppy: No drives detected
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1 at Device 1 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 2 display
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 440MHz), Sun Keyboard
OpenBoot 3.10.8 SME, 256 MB memory installed, Serial #16777215.
Ethernet address ff:ff:ff:ef:ff:ff, Host ID: efffffff.
The IDPROM contents are invalid
Boot device: net File and args:
Internal loopback test -- Did not receive expected loopback packet.
Evaluating: boot
Can't open boot device
ok